Once a year: KitchenAid recommends you change your grease once a year! This is relevant to how often you use your machine. For those who have oil leaking from the Planetary Ring (the chrome ring) then you need to change your grease.
How often should I replace the grease in my KitchenAid mixer?
Generally, you only need to change the grease in your KitchenAid mixer once a year. This is enough to protect your mixer’s parts and extend the life of your machine.
Does KitchenAid mixer need lubrication?
Your KitchenAid needs lubrication to do all that handy mixing and whipping, so inside the machine is a lifetime’s worth of solid grease. When you turn on your mixer, the grease distributes throughout the gears to ensure smooth operation.
What kind of grease goes in a KitchenAid mixer?
Super Lube 41160 Synthetic Grease (NLGI 2), 14.1 oz Canister, Translucent White.
What is the lifespan of a KitchenAid mixer?
Whirlpool, the company that owns the KitchenAid brand, suggests that the average KitchenAid mixer lifespan is about 10-15 years. However, this is probably a conservative estimate in my opinion. With the proper use and care, your KitchenAid mixer is more than capable of lasting a lot longer.
Turn off the vent hood and cooktop before removing the filters.
Remove each filter by pulling the spring release handle and then pulling down the filter.
Clean the filter in the sink with warm water and detergent, or the dishwasher.
Why does KitchenAid make grinding noise?
If the mixer is making a loud grinding noise, the worm gear within the mixer may be causing it. The worm gear is a plastic gear that is designed to fail if something goes wrong inside the mixer, so that the motor doesn’t burn out. Check out a guide here on how to replace it on a similar model of mixer.
How much does it cost to service a KitchenAid?
However, you need to understand that fixing an electric appliance can be dangerous. It’ll cost you about $100 to $375 to repair an electric KitchenAid appliance.
Does KitchenAid have a lifetime warranty?
Length of Warranty: One Year Full Warranty from date of purchase. KitchenAid Will Pay for Your Choice of: Hassle-Free Replacement of your Stand Mixer. See the next page for details on how to arrange for service, or call the Customer eXperience Center toll-free at 1-800-541-6390.
Is it normal for KitchenAid mixer to shake?
It is normal for a stand mixer to vibrate slightly while in use.
Can a KitchenAid mixer be serviced?
If you wish to repair your mixer yourself, you can contact an authorized service facility, as they offer repair and also sell internal parts. Please note that your warranty will not cover any damage or problems that may arise from self-repair.
Why is my KitchenAid mixer leaking brown oil?
When the grease inside the gearbox of a KitchenAid stand mixer separates, the liquid part of the grease can leak out of the mixer as an oil. The grease inside the mixer’s gearbox can separate for several reasons; heat from overloading the mixer, not using the mixer often enough, and time are the most common reasons.
This can happen for a few reasons, according to KitchenAid. You don’t use your mixer enough. You live in a very warm climate. Your mixer was stored on its side during shipping or storage, which can cause oil to leak out of the lock lever or around the speed controls.
Why is black stuff coming out of my KitchenAid?
If you have mistakenly washed your wire whip or other uncoated attachments and they are getting black stuff everywhere there is a fix for this! Put your attachment in a pot and add 2 cups of vinegar. Put in enough water to cover the neck of the attachment and boil it for 20 minutes.
Can I store KitchenAid mixer on its side?
Storing your mixer improperly: When stashed too low or too high, you’re at a greater risk of dropping the mixer or injuring yourself. You also want to make sure the mixer is stored upright and not on its side.
Do KitchenAid mixers have lead?
According to Rubin’s research, all KitchenAid stand mixer cast aluminum attachments from all years may contain lead. This reportedly includes mixer attachments sold in 2022. Not all KitchenAid stand mixer accessories have lead content — but the most common ones do.
How do I clean my KitchenAid mixer?
Tilt-Head Stand Mixers: Wire whip and uncoated tools should be washed by hand only. Alternatively, the bowl and tools can be hand-washed in hot, soapy water. Dry all tools thoroughly. Use a soft, damp cloth to wipe down your mixer.
Why is there oil in my intake tube?
It is caused by excessive carbon deposits or engine sludge developing inside the crankcase. When the oil does not flow efficiently, excessive engine oil pressure will be created and cause extra oil to push through the PCV valve and into the air intake.
Is oil dripping normal?
It’s normal to have a few oil drips a few hours after an oil change. However, any more than that, and you’ll need to determine where the leak is coming from. There are several ways to determine if the leak is coming from the drain plug, such as the gasket part being worn or dirty.
You can trade in any brand stand mixer, stand blender, or food processor and receive credit towards a NEW or refurbished KitchenAid stand mixer, stand blender, or food Processor!
What is the maintenance of a mixer?
Lubrication is key. You don’t have to oil the mixer every day, but it’s important to establish a schedule. Components like the sliding bowl height adjustor should be oiled twice per year. As soon as the gear housing starts to squeak, that needs oil too.
What number is best on KitchenAid mixer?
When your recipe calls for medium high speed, use speeds 6 and 7. This is the best speed for beating and creaming, as well as whipping ingredients to create batters.
Do refurbished KitchenAid mixers have a lifetime warranty?
All KitchenAid certified refurbished products are backed by a 6-month or 1-year limited warranty and a free 30-day return.
What speed should I knead my KitchenAid mixer?
Speed 2: When kneading yeast doughs, always use Speed 2 only for optimum results. Kneading in a mixer for 2 minutes is very efficient and is equivalent to kneading 10-12 minutes by hand.
Why does my KitchenAid bounce when kneading dough?
If the beater is too low, it will push into the bowl, and cause the mixer head to bounce.
Why is my KitchenAid whisk hitting the side of the bowl?
If your flat beater is hitting the bottom of the bowl, it’s possible that your beater is too low and needs to be raised. Your mixer is adjusted for optimum mixing at the factory, but through time and use, it can change, and it should be readjusted.
How often should you clean your stand mixer?
Your mixer will benefit from a deep cleaning two or three times a year. Especially when it’s getting maximum use during holiday cookie season! Use a dry toothbrush or specialty kitchen brush to clean debris around knobs on the mixer head. Once the dirt has been brushed away, use a damp cloth to wipe around the knobs.
How do you remove oxidation from a KitchenAid Beater?
Soak the beater in hot sudsy water and scrub the beater with a nylon scrubber to remove any residue build-up. KitchenAid also recommends using a powdered cleaning agent designed to remove oxidization to remove this residue.
Is there supposed to be a spring on my KitchenAid mixer?
If your KitchenAid mixer came without a spring on the beater shaft, this is normal. The newer KitchenAid mixers are produced without a spring as it is unnecessary for functionality. This makes the beater shaft easier to clean as well.
What is the difference between white grease and lithium grease?
The main difference that exists between standard lubricating grease and lithium grease is that standard grease is often used in industrial settings and lithium grease is primarily used in domestic settings.
What is so great about a KitchenAid mixer?
However, did you know that a KitchenAid stand mixer can also grind meat, shred chicken, slice, dice, and spiralize vegetables. Thanks to a wide range of accessories and attachments combined with a powerful, high-speed motor, a KitchenAid stand mixer is one of the most versatile additions you can make to your kitchen.
