If you need to lay down the refrigerator, make sure it is on its side, not the front or back. If the unit has to be laid down (not upright) for an extended period of time, wait 8 hours before restarting to allow the system to reset.
The answer is no. A refrigerator should never be transported on its back; the weight of the fridge can damage internal parts, and the internal fluids such as the oil inside the motor; or the refrigerant may shift and settle in undesirable places in the machine’s system.
How long should I wait to plug in my fridge after laying it down?
Once your fridge has been safely moved into the kitchen of your new home and is in the desired position, you should let it stand unplugged, in an upright position, for at least 4 hours to allow its compressor oil to settle.
Can you lay a refrigerator on its side for 30 minutes?
No, you should not move or store a refrigerator on its side. When a refrigerator is laid on its side, the oil in the compressor will flow from the compressor tube into the coolant lines.
What is the best way to transport a refrigerator laying down?
Top-Freezer models: Lay it on the side opposite the hinges so the door will remain closed.
Side-by-Side models: Lay it on the freezer side.
French-Door & Bottom-Freezer models: These must always remain upright, though they can be tilted to get through doorways, etc.
What happens if you lay a refrigerator on its side?
What happens to a refrigerator when you lay it on its side. Oil can run off the compressor and into the cooling coils when lying sideways. The oil is heavy and viscous, making it easy to clog the coils. As a result, the refrigerant gas will not pass through them, and your refrigerator will not chill.
How far can you tilt a refrigerator?
Remember, a fridge should not be tipped back more than 45 degrees. Walk the dolly with care to your first step. If you have to set the fridge back down at any time, do so slowly and with someone on the other side who can help you guide it down.
What happens if you don t wait 24 hours to plug a fridge in?
The level of caution you choose to exercise will be entirely up to you, but be warned that blockages in your system could occur – impacting the cooling capacity of your appliance – if you switch it on too early, so it’s always best to leave it for as long as you possibly can up the 24 hour mark.
How long should fridge be off before moving?
It is recommended that your refrigerator be turned off for about 24 hours before moving it. Allow your fridge time to defrost so that you may clean its interior to prevent mildew and mold growth during the move.
Can you plug in a fridge after tilting it?
The good news is that you can usually prevent damage such as this caused by tilting by standing your refrigerator upright for a minimum of 24 hours after you’ve tilted it. So if you or a group of movers accidentally tilts your refrigerator, let it stand for a day or so before plugging it back in.
Why do Whirlpool refrigerators take so long to cool down?
Dirty condenser coils are the most common cause for a Whirlpool refrigerator not cooling. Condenser coils dissipate heat as the refrigerant passes through them. If the coils are clogged in dirt and debris, they can’t release the heat properly.
What is the safest way to transport a fridge?
Secure the door shut using either tape or rope. You might want to wrap the appliance in bubble wrap, a blanket, or anything to absorb shocks it may suffer during the move. Secure the appliance to the trolley or truck it’s going travel in with heavy-duty ropes. Refrigerators travel best standing up.
Can you transport a freezer lying down?
If transporting it in an upright position is not possible, lay it down on the compressor side of the unit. Be careful to secure the door to prevent it from opening. Set it upright in its final location and allow the freezer to sit for the same amount of time that it was on its side (24 hours maximum).
How long can a freezer lay on its side?
If on its side for more than a day, leave standing for 24 hours before running. If it was laying on its side just briefly to service, clean or adjust, it is enough to allow only a few minutes of standing time. Do not lay the unit on its front or rear.
Can a fridge fit in the back of a truck?
One of the best parts of owning a truck is the complete freedom you have when moving things. Your truck bed can transport a lot of things at once, or it can transport large items like a refrigerator.
Can you transport a fridge in a car?
The fridge should be held from both sides. It would be helpful to use a hand trolley. After placing the refrigerator in the car, fasten it with special belts to prevent any movement during transportation. A hand trolley would be helpful during fridge transportation.
Can you move a fridge in a cargo van?
Most refrigerators are too large to fit inside the average size car. So before moving your fridge, make sure you’ve reserved a moving truck or cargo van for the job. Ideally, you should look for a truck rental with a loading ramp. This way you’ll be able to pull the dolly right up to the bed of the truck.
It might seem that laying it down is the safer option to prevent damage. However, putting a fridge in a horizontal position can permanently damage its ability to cool. Even just tilting it at an angle for a short period of time runs the risk of introducing unwanted chemicals and oils into your cooling system.
Why do you have to wait 24 hours to plug in a fridge?
Fridges and freezers are full of fluid that’s used to cool the compartments. In transit, your appliance gets shaken around, so it’s best to let everything settle before you plug it in.
Can you tilt a new fridge on its side?
It is always best to keep a fridge or freezer upright when moving, but you can transport a fridge on its side too. Just remember that before it is plugged in and switched on, it should be left upright for a minimum of 3 hours.
How do I cool my Whirlpool refrigerator?
If you need to adjust the temperature, wait at least 24 hours between adjustments and then recheck the temperature. To make the Refrigerator colder, adjust the control to the next higher setting. To make the Refrigerator less cold, adjust the control to the next lower setting.
How long does a Whirlpool refrigerator last?
According to the United States Department of Energy, refrigerators last approximately 12 years. At that point, it’s likely time to replace it. Of course, if your refrigerator is not energy-efficient, you may want to consider replacing it before it stops working.
How do you transport a refrigerator without a truck?
Use an Appliance Dolly with Cargo Straps: Tilt your fridge on its side rather than front-to-back, then carefully slide the dolly underneath the fridge. Once the fridge is placed onto the dolly, use moving straps and automatic tighteners to wrap the entire length of the appliance and secure the doors.
Can you lay a freezer on its side for 30 minutes?
Keep it upright: If a fridge freezer is on its back or side, oil flows into the cooling tubes, which can be problematic and result in breakages. Where possible, transport it upright – and don’t tilt it! If you have no other option, leave it upright and unplugged for at least the same time it was horizontal.
How long does a new freezer need to sit?
Once the unit is in the house you should: Leave the appliance to sit for 3 hours. Then plug it in and switch it on. It should then be left overnight to stabilize before putting any fresh food into it.
How much clearance do you need for the back of a refrigerator?
Rear Clearance – Allow between one to two inches of space at the rear of the refrigerator for proper airflow. Top Clearance – Ensure there is a minimum of one-half inch to one-inch of clearance on top of the unit.
Why is my Whirlpool fridge warm but freezer is cold?
When you find your Whirlpool refrigerator not cooling but freezer works fine a defective evaporator fan motor is a common part malfunction. This motor powers the fan that blows cold air over the refrigerator coils. Without this fan refrigerant won’t cool enough to maintain the refrigerator’s temperature.
