The short answer is no, you do not need a Google Nest Protect in every room. However, you may want to install one in each level of your home, and in areas where there is a higher risk of fire or carbon monoxide (CO) exposure. In this article, we will explain why Google Nest Protect is a smart device that can enhance your home safety, how many units you should have, and where to place them for optimal protection.
What is Google Nest Protect and why do you need it?
Google Nest Protect is a smart smoke and CO alarm that connects to your Wi-Fi network and alerts you via your smartphone or tablet if it detects smoke, fire, or CO in your home. It also speaks to you in a human voice, telling you what and where the problem is, and giving you instructions on what to do. You can also silence the alarm from your phone, if it is a false alarm or a low-battery warning.
Google Nest Protect is more than just an alarm. It is also a night light that turns on when it senses motion, a home monitor that checks itself and sends you monthly reports, and a smart assistant that works with other Google Nest devices, such as Nest Thermostat, Nest Cam, and Nest Hub. You can also integrate it with other smart home platforms, such as Amazon Alexa, Google Assistant, and IFTTT.
Google Nest Protect can help you prevent and respond to emergencies in your home, such as fire, CO poisoning, and power outage. It can also save you money on your energy bills, by adjusting your thermostat when you are away or asleep, and by reminding you to change your air filters. Google Nest Protect is a device that can make your home smarter and safer.
How many Google Nest Protect units do you need?
According to the National Fire Protection Association (NFPA), you should have at least one smoke alarm on every level of your home, including the basement, and in every bedroom or sleeping area. You should also have one smoke alarm in or near the kitchen, and one in or near any other room where you use fire or fuel-burning appliances, such as a furnace, water heater, fireplace, or stove. Additionally, you should have at least one CO alarm on every level of your home, and in every bedroom or sleeping area.
Google Nest Protect combines both smoke and CO detection in one device, so you do not need to install separate alarms for each hazard. However, you may still want to follow the NFPA recommendations and have one Google Nest Protect on every level of your home, and in every bedroom or sleeping area. This way, you can ensure that you will hear the alarm and receive the notification on your phone, no matter where you are in your home. You can also link multiple Google Nest Protect units together, so that they will all sound the alarm and tell you the location of the problem, if one of them detects smoke, fire, or CO.
Where should you place your Google Nest Protect units?
The best place to install your Google Nest Protect units is on the ceiling, at least 10 inches (25 cm) away from any wall or corner. This is because smoke and CO rise and spread along the ceiling, and you want your alarm to detect them as soon as possible. You should also avoid placing your Google Nest Protect near windows, doors, vents, fans, or air conditioners, as these can interfere with the detection or cause false alarms.
If you cannot install your Google Nest Protect on the ceiling, you can also place it on the wall, as long as it is 4 to 12 inches (10 to 30 cm) below the ceiling, and not directly above any door or window. You should also make sure that the Nest logo is facing outwards, and that the device is not blocked by any furniture, curtains, or decorations.
You should also follow some specific guidelines for placing your Google Nest Protect in different rooms of your home, such as:
In the kitchen, you should install your Google Nest Protect at least 10 feet (3 m) away from any cooking appliance, such as a stove, oven, or microwave. This is because cooking can produce smoke, steam, or grease, which can trigger false alarms. You should also avoid placing your Google Nest Protect near a dishwasher, refrigerator, or sink, as these can produce moisture or heat, which can affect the detection or damage the device.
In the bedroom, you should install your Google Nest Protect on the ceiling or wall near the door, but not directly above your bed or pillow. This is because you want to hear the alarm and wake up, but not be startled or annoyed by it. You should also avoid placing your Google Nest Protect near a humidifier, air purifier, or fan, as these can produce moisture, dust, or airflow, which can interfere with the detection or cause false alarms.
In the bathroom, you should install your Google Nest Protect outside the bathroom door, but not too far away from it. This is because bathrooms can produce steam, moisture, or aerosols, which can trigger false alarms or damage the device. You should also avoid placing your Google Nest Protect near a shower, tub, or toilet, as these can produce water or splashes, which can affect the detection or damage the device.
Google Nest Protect is a smart smoke and CO alarm that can enhance your home safety and comfort. You do not need to have one in every room, but you may want to have one on every level of your home, and in every bedroom or sleeping area. You should also follow some best practices for placing your Google Nest Protect units, to ensure optimal detection and performance. By installing and maintaining your Google Nest Protect units properly, you can enjoy the benefits of a smart and safe home.
